W12x35 is a wide flange steel beam that is 12.5 in deep with a 6.56 in flange and weighs 35 lb/ft (52 kg/m). Its metric designation is W310x52. All values below come from the AISC Shapes Database v16.0.
W12x35 Dimensions
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Nominal weight | W | 35 lb/ft | 52 kg/m |
| Cross-sectional area | A | 10.3 in² | 6,650 mm² |
| Depth | d | 12.5 in | 318 mm |
| Flange width | bf | 6.56 in | 167 mm |
| Web thickness | tw | 0.3 in | 7.62 mm |
| Flange thickness | tf | 0.52 in | 13.2 mm |
| Distance to web toe of fillet (design) | kdes | 0.82 in | 20.8 mm |
| Distance to web toe of fillet (detailing) | kdet | 1.1875 in | 30.2 mm |
| Web center line to flange toe of fillet | k1 | 0.75 in | 19.1 mm |
| Distance between web toes of fillets | T | 10.125 in | 257 mm |
| Workable gage (inner holes) | WGi | 3.5 in | 88.9 mm |
W12x35 Section Properties
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Moment of inertia, x-axis | Ix | 285 in⁴ | 119 ×10⁶ mm⁴ |
| Elastic section modulus, x-axis | Sx | 45.6 in³ | 747 ×10³ mm³ |
| Plastic section modulus, x-axis | Zx | 51.2 in³ | 839 ×10³ mm³ |
| Radius of gyration, x-axis | rx | 5.25 in | 133 mm |
| Moment of inertia, y-axis | Iy | 24.5 in⁴ | 10.2 ×10⁶ mm⁴ |
| Elastic section modulus, y-axis | Sy | 7.47 in³ | 122 ×10³ mm³ |
| Plastic section modulus, y-axis | Zy | 11.5 in³ | 188 ×10³ mm³ |
| Radius of gyration, y-axis | ry | 1.54 in | 39.1 mm |
| Torsional constant | J | 0.741 in⁴ | 308 ×10³ mm⁴ |
| Warping constant | Cw | 879 in⁶ | 236 ×10⁹ mm⁶ |
| Effective radius of gyration | rts | 1.79 in | 45.5 mm |
| Distance between flange centroids | ho | 12 in | 305 mm |
| Flange slenderness | bf/2tf | 6.31 | 6.31 |
| Web slenderness | h/tw | 36.2 | 36.2 |
W12x35 Weight Calculator
Enter a length to get the total weight of a W12x35 beam. A 20 ft length weighs 700 lb.
Uses the AISC nominal weight: 35 lb/ft (52 kg/m).
Beams Similar to W12x35
See every W12 size in the W12 beam sizes chart, or compare all shapes in the wide flange beam sizes chart.
W12x35 FAQ
What does W12x35 mean?
W means wide flange. The first number (12) is the nominal depth in inches, and the second number (35) is the weight in pounds per foot. The actual depth of W12x35 is 12.5 in. How to read steel beam sizes.
How much does a W12x35 beam weigh?
W12x35 weighs 35 lb per foot (52 kg per meter). A 20 ft beam weighs about 700 lb. Use the calculator above for any length.
What is the metric equivalent of W12x35?
The metric (SI) designation is W310x52: 318 mm deep with a 167 mm flange and 52 kg/m.
How far can a W12x35 beam span?
Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.
Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.