W16x67 is a wide flange steel beam that is 16.3 in deep with a 10.2 in flange and weighs 67 lb/ft (100 kg/m). Its metric designation is W410x100. All values below come from the AISC Shapes Database v16.0.
W16x67 Dimensions
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Nominal weight | W | 67 lb/ft | 100 kg/m |
| Cross-sectional area | A | 19.6 in² | 12,600 mm² |
| Depth | d | 16.3 in | 414 mm |
| Flange width | bf | 10.2 in | 259 mm |
| Web thickness | tw | 0.395 in | 10 mm |
| Flange thickness | tf | 0.665 in | 16.9 mm |
| Distance to web toe of fillet (design) | kdes | 1.07 in | 27.2 mm |
| Distance to web toe of fillet (detailing) | kdet | 1.5625 in | 39.7 mm |
| Web center line to flange toe of fillet | k1 | 1 in | 25.4 mm |
| Distance between web toes of fillets | T | 13.25 in | 337 mm |
| Workable gage (inner holes) | WGi | 5.5 in | 140 mm |
W16x67 Section Properties
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Moment of inertia, x-axis | Ix | 954 in⁴ | 397 ×10⁶ mm⁴ |
| Elastic section modulus, x-axis | Sx | 117 in³ | 1,920 ×10³ mm³ |
| Plastic section modulus, x-axis | Zx | 130 in³ | 2,130 ×10³ mm³ |
| Radius of gyration, x-axis | rx | 6.96 in | 177 mm |
| Moment of inertia, y-axis | Iy | 119 in⁴ | 49.5 ×10⁶ mm⁴ |
| Elastic section modulus, y-axis | Sy | 23.2 in³ | 380 ×10³ mm³ |
| Plastic section modulus, y-axis | Zy | 35.5 in³ | 582 ×10³ mm³ |
| Radius of gyration, y-axis | ry | 2.46 in | 62.5 mm |
| Torsional constant | J | 2.39 in⁴ | 995 ×10³ mm⁴ |
| Warping constant | Cw | 7,300 in⁶ | 1,960 ×10⁹ mm⁶ |
| Effective radius of gyration | rts | 2.82 in | 71.6 mm |
| Distance between flange centroids | ho | 15.6 in | 396 mm |
| Flange slenderness | bf/2tf | 7.7 | 7.7 |
| Web slenderness | h/tw | 35.9 | 35.9 |
W16x67 Weight Calculator
Enter a length to get the total weight of a W16x67 beam. A 20 ft length weighs 1,340 lb.
Uses the AISC nominal weight: 67 lb/ft (100 kg/m).
Beams Similar to W16x67
| Shape | Weight (lb/ft) | Depth (in) | Flange width (in) |
|---|---|---|---|
| W16x77 | 77 | 16.5 | 10.3 |
| W16x57 | 57 | 16.4 | 7.12 |
| W16x50 | 50 | 16.3 | 7.07 |
See every W16 size in the W16 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W16x67 is listed as W410x100 in the metric wide flange beam sizes chart.
W16x67 FAQ
What does W16x67 mean?
W means wide flange. The first number (16) is the nominal depth in inches, and the second number (67) is the weight in pounds per foot. The actual depth of W16x67 is 16.3 in. How to read steel beam sizes.
How much does a W16x67 beam weigh?
W16x67 weighs 67 lb per foot (100 kg per meter). A 20 ft beam weighs about 1,340 lb. Use the calculator above for any length.
What is the metric equivalent of W16x67?
The metric (SI) designation is W410x100: 414 mm deep with a 259 mm flange and 100 kg/m.
How far can a W16x67 beam span?
Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.
Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.