W8x67 is a wide flange steel beam that is 9 in deep with an 8.28 in flange and weighs 67 lb/ft (100 kg/m). Its metric designation is W200x100. All values below come from the AISC Shapes Database v16.0.
W8x67 Dimensions
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Nominal weight | W | 67 lb/ft | 100 kg/m |
| Cross-sectional area | A | 19.7 in² | 12,700 mm² |
| Depth | d | 9 in | 229 mm |
| Flange width | bf | 8.28 in | 210 mm |
| Web thickness | tw | 0.57 in | 14.5 mm |
| Flange thickness | tf | 0.935 in | 23.7 mm |
| Distance to web toe of fillet (design) | kdes | 1.33 in | 33.8 mm |
| Distance to web toe of fillet (detailing) | kdet | 1.625 in | 41.3 mm |
| Web center line to flange toe of fillet | k1 | 0.9375 in | 23.8 mm |
| Distance between web toes of fillets | T | 5.75 in | 146 mm |
| Workable gage (inner holes) | WGi | 5.5 in | 140 mm |
W8x67 Section Properties
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Moment of inertia, x-axis | Ix | 272 in⁴ | 113 ×10⁶ mm⁴ |
| Elastic section modulus, x-axis | Sx | 60.4 in³ | 990 ×10³ mm³ |
| Plastic section modulus, x-axis | Zx | 70.1 in³ | 1,150 ×10³ mm³ |
| Radius of gyration, x-axis | rx | 3.72 in | 94.5 mm |
| Moment of inertia, y-axis | Iy | 88.6 in⁴ | 36.9 ×10⁶ mm⁴ |
| Elastic section modulus, y-axis | Sy | 21.4 in³ | 351 ×10³ mm³ |
| Plastic section modulus, y-axis | Zy | 32.7 in³ | 536 ×10³ mm³ |
| Radius of gyration, y-axis | ry | 2.12 in | 53.8 mm |
| Torsional constant | J | 5.05 in⁴ | 2,100 ×10³ mm⁴ |
| Warping constant | Cw | 1,440 in⁶ | 387 ×10⁹ mm⁶ |
| Effective radius of gyration | rts | 2.43 in | 61.7 mm |
| Distance between flange centroids | ho | 8.07 in | 205 mm |
| Flange slenderness | bf/2tf | 4.43 | 4.43 |
| Web slenderness | h/tw | 11.1 | 11.1 |
W8x67 Weight Calculator
Enter a length to get the total weight of a W8x67 beam. A 20 ft length weighs 1,340 lb.
Uses the AISC nominal weight: 67 lb/ft (100 kg/m).
Beams Similar to W8x67
| Shape | Weight (lb/ft) | Depth (in) | Flange width (in) |
|---|---|---|---|
| W8x58 | 58 | 8.75 | 8.22 |
| W8x48 | 48 | 8.5 | 8.11 |
| W8x40 | 40 | 8.25 | 8.07 |
See every W8 size in the W8 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W8x67 is listed as W200x100 in the metric wide flange beam sizes chart.
W8x67 FAQ
What does W8x67 mean?
W means wide flange. The first number (8) is the nominal depth in inches, and the second number (67) is the weight in pounds per foot. The actual depth of W8x67 is 9 in. How to read steel beam sizes.
How much does a W8x67 beam weigh?
W8x67 weighs 67 lb per foot (100 kg per meter). A 20 ft beam weighs about 1,340 lb. Use the calculator above for any length.
What is the metric equivalent of W8x67?
The metric (SI) designation is W200x100: 229 mm deep with a 210 mm flange and 100 kg/m.
How far can a W8x67 beam span?
Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.
Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.