W24x146 is a wide flange steel beam that is 24.7 in deep with a 12.9 in flange and weighs 146 lb/ft (217 kg/m). Its metric designation is W610x217. All values below come from the AISC Shapes Database v16.0.
W24x146 Dimensions
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Nominal weight | W | 146 lb/ft | 217 kg/m |
| Cross-sectional area | A | 43 in² | 27,700 mm² |
| Depth | d | 24.7 in | 627 mm |
| Flange width | bf | 12.9 in | 328 mm |
| Web thickness | tw | 0.65 in | 16.5 mm |
| Flange thickness | tf | 1.09 in | 27.7 mm |
| Distance to web toe of fillet (design) | kdes | 1.59 in | 40.4 mm |
| Distance to web toe of fillet (detailing) | kdet | 2.375 in | 60.3 mm |
| Web center line to flange toe of fillet | k1 | 1.5625 in | 39.7 mm |
| Distance between web toes of fillets | T | 20 in | 508 mm |
| Workable gage (inner holes) | WGi | 5.5 in | 140 mm |
W24x146 Section Properties
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Moment of inertia, x-axis | Ix | 4,580 in⁴ | 1,910 ×10⁶ mm⁴ |
| Elastic section modulus, x-axis | Sx | 371 in³ | 6,080 ×10³ mm³ |
| Plastic section modulus, x-axis | Zx | 418 in³ | 6,850 ×10³ mm³ |
| Radius of gyration, x-axis | rx | 10.3 in | 262 mm |
| Moment of inertia, y-axis | Iy | 391 in⁴ | 163 ×10⁶ mm⁴ |
| Elastic section modulus, y-axis | Sy | 60.5 in³ | 991 ×10³ mm³ |
| Plastic section modulus, y-axis | Zy | 93.2 in³ | 1,530 ×10³ mm³ |
| Radius of gyration, y-axis | ry | 3.01 in | 76.5 mm |
| Torsional constant | J | 13.4 in⁴ | 5,580 ×10³ mm⁴ |
| Warping constant | Cw | 54,600 in⁶ | 14,700 ×10⁹ mm⁶ |
| Effective radius of gyration | rts | 3.53 in | 89.7 mm |
| Distance between flange centroids | ho | 23.6 in | 599 mm |
| Flange slenderness | bf/2tf | 5.92 | 5.92 |
| Web slenderness | h/tw | 33.2 | 33.2 |
W24x146 Weight Calculator
Enter a length to get the total weight of a W24x146 beam. A 20 ft length weighs 2,920 lb.
Uses the AISC nominal weight: 146 lb/ft (217 kg/m).
Beams Similar to W24x146
| Shape | Weight (lb/ft) | Depth (in) | Flange width (in) |
|---|---|---|---|
| W24x131 | 131 | 24.5 | 12.9 |
| W24x162 | 162 | 25 | 13 |
| W24x117 | 117 | 24.3 | 12.8 |
See every W24 size in the W24 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W24x146 is listed as W610x217 in the metric wide flange beam sizes chart.
W24x146 FAQ
What does W24x146 mean?
W means wide flange. The first number (24) is the nominal depth in inches, and the second number (146) is the weight in pounds per foot. The actual depth of W24x146 is 24.7 in. How to read steel beam sizes.
How much does a W24x146 beam weigh?
W24x146 weighs 146 lb per foot (217 kg per meter). A 20 ft beam weighs about 2,920 lb. Use the calculator above for any length.
What is the metric equivalent of W24x146?
The metric (SI) designation is W610x217: 627 mm deep with a 328 mm flange and 217 kg/m.
How far can a W24x146 beam span?
Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.
Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.