W24x103 is a wide flange steel beam that is 24.5 in deep with a 9 in flange and weighs 103 lb/ft (153 kg/m). Its metric designation is W610x153. All values below come from the AISC Shapes Database v16.0.
W24x103 Dimensions
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Nominal weight | W | 103 lb/ft | 153 kg/m |
| Cross-sectional area | A | 30.3 in² | 19,500 mm² |
| Depth | d | 24.5 in | 622 mm |
| Flange width | bf | 9 in | 229 mm |
| Web thickness | tw | 0.55 in | 14 mm |
| Flange thickness | tf | 0.98 in | 24.9 mm |
| Distance to web toe of fillet (design) | kdes | 1.48 in | 37.6 mm |
| Distance to web toe of fillet (detailing) | kdet | 2.25 in | 57.2 mm |
| Web center line to flange toe of fillet | k1 | 1.5 in | 38.1 mm |
| Distance between web toes of fillets | T | 20 in | 508 mm |
| Workable gage (inner holes) | WGi | 5.5 in | 140 mm |
W24x103 Section Properties
| Property | Symbol | Imperial | Metric |
|---|---|---|---|
| Moment of inertia, x-axis | Ix | 3,000 in⁴ | 1,250 ×10⁶ mm⁴ |
| Elastic section modulus, x-axis | Sx | 245 in³ | 4,010 ×10³ mm³ |
| Plastic section modulus, x-axis | Zx | 280 in³ | 4,590 ×10³ mm³ |
| Radius of gyration, x-axis | rx | 10 in | 254 mm |
| Moment of inertia, y-axis | Iy | 119 in⁴ | 49.5 ×10⁶ mm⁴ |
| Elastic section modulus, y-axis | Sy | 26.5 in³ | 434 ×10³ mm³ |
| Plastic section modulus, y-axis | Zy | 41.5 in³ | 680 ×10³ mm³ |
| Radius of gyration, y-axis | ry | 1.99 in | 50.5 mm |
| Torsional constant | J | 7.07 in⁴ | 2,940 ×10³ mm⁴ |
| Warping constant | Cw | 16,600 in⁶ | 4,460 ×10⁹ mm⁶ |
| Effective radius of gyration | rts | 2.4 in | 61 mm |
| Distance between flange centroids | ho | 23.5 in | 597 mm |
| Flange slenderness | bf/2tf | 4.59 | 4.59 |
| Web slenderness | h/tw | 39.2 | 39.2 |
W24x103 Weight Calculator
Enter a length to get the total weight of a W24x103 beam. A 20 ft length weighs 2,060 lb.
Uses the AISC nominal weight: 103 lb/ft (153 kg/m).
Beams Similar to W24x103
| Shape | Weight (lb/ft) | Depth (in) | Flange width (in) |
|---|---|---|---|
| W24x104 | 104 | 24.1 | 12.8 |
| W24x94 | 94 | 24.3 | 9.07 |
| W24x117 | 117 | 24.3 | 12.8 |
See every W24 size in the W24 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W24x103 is listed as W610x153 in the metric wide flange beam sizes chart.
W24x103 FAQ
What does W24x103 mean?
W means wide flange. The first number (24) is the nominal depth in inches, and the second number (103) is the weight in pounds per foot. The actual depth of W24x103 is 24.5 in. How to read steel beam sizes.
How much does a W24x103 beam weigh?
W24x103 weighs 103 lb per foot (153 kg per meter). A 20 ft beam weighs about 2,060 lb. Use the calculator above for any length.
What is the metric equivalent of W24x103?
The metric (SI) designation is W610x153: 622 mm deep with a 229 mm flange and 153 kg/m.
How far can a W24x103 beam span?
Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.
Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.