Skip to content

W24x76 (W610x113) Beam Dimensions, Weight & Properties

All 25 AISC dimensions and properties for W24x76 — Ix, Sx, Zx, rts and more — plus the W610x113 metric equivalent and a weight calculator.
Source: AISC Shapes Database v16.0Imperial & metric

W24x76 is a wide flange steel beam that is 23.9 in deep with an 8.99 in flange and weighs 76 lb/ft (113 kg/m). Its metric designation is W610x113. All values below come from the AISC Shapes Database v16.0.

W24x76 Dimensions

PropertySymbolImperialMetric
Nominal weightW76 lb/ft113 kg/m
Cross-sectional areaA22.4 in²14,500 mm²
Depthd23.9 in607 mm
Flange widthbf8.99 in228 mm
Web thicknesstw0.44 in11.2 mm
Flange thicknesstf0.68 in17.3 mm
Distance to web toe of fillet (design)kdes1.18 in30 mm
Distance to web toe of fillet (detailing)kdet1.9375 in49.2 mm
Web center line to flange toe of filletk11.4375 in36.5 mm
Distance between web toes of filletsT20 in508 mm
Workable gage (inner holes)WGi5.5 in140 mm
W24x76 cross-section with depth, flange width, web thickness and flange thickness d = 23.9 in bf = 8.99 in tf = 0.68 in tw = 0.44 in
W24x76 section (drawn to scale for depth and flange width; thicknesses enlarged for readability)

W24x76 Section Properties

PropertySymbolImperialMetric
Moment of inertia, x-axisIx2,100 in⁴874 ×10⁶ mm⁴
Elastic section modulus, x-axisSx176 in³2,880 ×10³ mm³
Plastic section modulus, x-axisZx200 in³3,280 ×10³ mm³
Radius of gyration, x-axisrx9.69 in246 mm
Moment of inertia, y-axisIy82.5 in⁴34.3 ×10⁶ mm⁴
Elastic section modulus, y-axisSy18.4 in³302 ×10³ mm³
Plastic section modulus, y-axisZy28.6 in³469 ×10³ mm³
Radius of gyration, y-axisry1.92 in48.8 mm
Torsional constantJ2.68 in⁴1,120 ×10³ mm⁴
Warping constantCw11,100 in⁶2,980 ×10⁹ mm⁶
Effective radius of gyrationrts2.33 in59.2 mm
Distance between flange centroidsho23.2 in589 mm
Flange slendernessbf/2tf6.616.61
Web slendernessh/tw4949

W24x76 Weight Calculator

Enter a length to get the total weight of a W24x76 beam. A 20 ft length weighs 1,520 lb.

Uses the AISC nominal weight: 76 lb/ft (113 kg/m).

Beams Similar to W24x76

ShapeWeight (lb/ft)Depth (in)Flange width (in)
W24x848424.19.02
W24x686823.78.97
W24x626223.77.04

See every W24 size in the W24 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W24x76 is listed as W610x113 in the metric wide flange beam sizes chart.

W24x76 FAQ

What does W24x76 mean?

W means wide flange. The first number (24) is the nominal depth in inches, and the second number (76) is the weight in pounds per foot. The actual depth of W24x76 is 23.9 in. How to read steel beam sizes.

How much does a W24x76 beam weigh?

W24x76 weighs 76 lb per foot (113 kg per meter). A 20 ft beam weighs about 1,520 lb. Use the calculator above for any length.

What is the metric equivalent of W24x76?

The metric (SI) designation is W610x113: 607 mm deep with a 228 mm flange and 113 kg/m.

How far can a W24x76 beam span?

Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.


Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.

Look up any steel beam size

Search all 339 AISC W, S and HP shapes, compare sizes by depth and work out total weight in seconds.