Skip to content

W24x94 (W610x140) Beam Dimensions, Weight & Properties

All 25 AISC dimensions and properties for W24x94 — Ix, Sx, Zx, rts and more — plus the W610x140 metric equivalent and a weight calculator.
Source: AISC Shapes Database v16.0Imperial & metric

W24x94 is a wide flange steel beam that is 24.3 in deep with a 9.07 in flange and weighs 94 lb/ft (140 kg/m). Its metric designation is W610x140. All values below come from the AISC Shapes Database v16.0.

W24x94 Dimensions

PropertySymbolImperialMetric
Nominal weightW94 lb/ft140 kg/m
Cross-sectional areaA27.7 in²17,900 mm²
Depthd24.3 in617 mm
Flange widthbf9.07 in230 mm
Web thicknesstw0.515 in13.1 mm
Flange thicknesstf0.875 in22.2 mm
Distance to web toe of fillet (design)kdes1.38 in35.1 mm
Distance to web toe of fillet (detailing)kdet2.125 in54 mm
Web center line to flange toe of filletk11.4375 in36.5 mm
Distance between web toes of filletsT20 in508 mm
Workable gage (inner holes)WGi5.5 in140 mm
W24x94 cross-section with depth, flange width, web thickness and flange thickness d = 24.3 in bf = 9.07 in tf = 0.875 in tw = 0.515 in
W24x94 section (drawn to scale for depth and flange width; thicknesses enlarged for readability)

W24x94 Section Properties

PropertySymbolImperialMetric
Moment of inertia, x-axisIx2,700 in⁴1,120 ×10⁶ mm⁴
Elastic section modulus, x-axisSx222 in³3,640 ×10³ mm³
Plastic section modulus, x-axisZx254 in³4,160 ×10³ mm³
Radius of gyration, x-axisrx9.87 in251 mm
Moment of inertia, y-axisIy109 in⁴45.4 ×10⁶ mm⁴
Elastic section modulus, y-axisSy24 in³393 ×10³ mm³
Plastic section modulus, y-axisZy37.5 in³615 ×10³ mm³
Radius of gyration, y-axisry1.98 in50.3 mm
Torsional constantJ5.26 in⁴2,190 ×10³ mm⁴
Warping constantCw15,000 in⁶4,030 ×10⁹ mm⁶
Effective radius of gyrationrts2.4 in61 mm
Distance between flange centroidsho23.4 in594 mm
Flange slendernessbf/2tf5.185.18
Web slendernessh/tw41.941.9

W24x94 Weight Calculator

Enter a length to get the total weight of a W24x94 beam. A 20 ft length weighs 1,880 lb.

Uses the AISC nominal weight: 94 lb/ft (140 kg/m).

Beams Similar to W24x94

ShapeWeight (lb/ft)Depth (in)Flange width (in)
W24x10310324.59
W24x10410424.112.8
W24x848424.19.02

See every W24 size in the W24 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W24x94 is listed as W610x140 in the metric wide flange beam sizes chart.

W24x94 FAQ

What does W24x94 mean?

W means wide flange. The first number (24) is the nominal depth in inches, and the second number (94) is the weight in pounds per foot. The actual depth of W24x94 is 24.3 in. How to read steel beam sizes.

How much does a W24x94 beam weigh?

W24x94 weighs 94 lb per foot (140 kg per meter). A 20 ft beam weighs about 1,880 lb. Use the calculator above for any length.

What is the metric equivalent of W24x94?

The metric (SI) designation is W610x140: 617 mm deep with a 230 mm flange and 140 kg/m.

How far can a W24x94 beam span?

Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.


Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.

Look up any steel beam size

Search all 339 AISC W, S and HP shapes, compare sizes by depth and work out total weight in seconds.