Skip to content

W24x103 (W610x153) Beam Dimensions, Weight & Properties

All 25 AISC dimensions and properties for W24x103 — Ix, Sx, Zx, rts and more — plus the W610x153 metric equivalent and a weight calculator.
Source: AISC Shapes Database v16.0Imperial & metric

W24x103 is a wide flange steel beam that is 24.5 in deep with a 9 in flange and weighs 103 lb/ft (153 kg/m). Its metric designation is W610x153. All values below come from the AISC Shapes Database v16.0.

W24x103 Dimensions

PropertySymbolImperialMetric
Nominal weightW103 lb/ft153 kg/m
Cross-sectional areaA30.3 in²19,500 mm²
Depthd24.5 in622 mm
Flange widthbf9 in229 mm
Web thicknesstw0.55 in14 mm
Flange thicknesstf0.98 in24.9 mm
Distance to web toe of fillet (design)kdes1.48 in37.6 mm
Distance to web toe of fillet (detailing)kdet2.25 in57.2 mm
Web center line to flange toe of filletk11.5 in38.1 mm
Distance between web toes of filletsT20 in508 mm
Workable gage (inner holes)WGi5.5 in140 mm
W24x103 cross-section with depth, flange width, web thickness and flange thickness d = 24.5 in bf = 9 in tf = 0.98 in tw = 0.55 in
W24x103 section (drawn to scale for depth and flange width; thicknesses enlarged for readability)

W24x103 Section Properties

PropertySymbolImperialMetric
Moment of inertia, x-axisIx3,000 in⁴1,250 ×10⁶ mm⁴
Elastic section modulus, x-axisSx245 in³4,010 ×10³ mm³
Plastic section modulus, x-axisZx280 in³4,590 ×10³ mm³
Radius of gyration, x-axisrx10 in254 mm
Moment of inertia, y-axisIy119 in⁴49.5 ×10⁶ mm⁴
Elastic section modulus, y-axisSy26.5 in³434 ×10³ mm³
Plastic section modulus, y-axisZy41.5 in³680 ×10³ mm³
Radius of gyration, y-axisry1.99 in50.5 mm
Torsional constantJ7.07 in⁴2,940 ×10³ mm⁴
Warping constantCw16,600 in⁶4,460 ×10⁹ mm⁶
Effective radius of gyrationrts2.4 in61 mm
Distance between flange centroidsho23.5 in597 mm
Flange slendernessbf/2tf4.594.59
Web slendernessh/tw39.239.2

W24x103 Weight Calculator

Enter a length to get the total weight of a W24x103 beam. A 20 ft length weighs 2,060 lb.

Uses the AISC nominal weight: 103 lb/ft (153 kg/m).

Beams Similar to W24x103

ShapeWeight (lb/ft)Depth (in)Flange width (in)
W24x10410424.112.8
W24x949424.39.07
W24x11711724.312.8

See every W24 size in the W24 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W24x103 is listed as W610x153 in the metric wide flange beam sizes chart.

W24x103 FAQ

What does W24x103 mean?

W means wide flange. The first number (24) is the nominal depth in inches, and the second number (103) is the weight in pounds per foot. The actual depth of W24x103 is 24.5 in. How to read steel beam sizes.

How much does a W24x103 beam weigh?

W24x103 weighs 103 lb per foot (153 kg per meter). A 20 ft beam weighs about 2,060 lb. Use the calculator above for any length.

What is the metric equivalent of W24x103?

The metric (SI) designation is W610x153: 622 mm deep with a 229 mm flange and 153 kg/m.

How far can a W24x103 beam span?

Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.


Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.

Look up any steel beam size

Search all 339 AISC W, S and HP shapes, compare sizes by depth and work out total weight in seconds.