Skip to content

W24x146 (W610x217) Beam Dimensions, Weight & Properties

All 25 AISC dimensions and properties for W24x146 — Ix, Sx, Zx, rts and more — plus the W610x217 metric equivalent and a weight calculator.
Source: AISC Shapes Database v16.0Imperial & metric

W24x146 is a wide flange steel beam that is 24.7 in deep with a 12.9 in flange and weighs 146 lb/ft (217 kg/m). Its metric designation is W610x217. All values below come from the AISC Shapes Database v16.0.

W24x146 Dimensions

PropertySymbolImperialMetric
Nominal weightW146 lb/ft217 kg/m
Cross-sectional areaA43 in²27,700 mm²
Depthd24.7 in627 mm
Flange widthbf12.9 in328 mm
Web thicknesstw0.65 in16.5 mm
Flange thicknesstf1.09 in27.7 mm
Distance to web toe of fillet (design)kdes1.59 in40.4 mm
Distance to web toe of fillet (detailing)kdet2.375 in60.3 mm
Web center line to flange toe of filletk11.5625 in39.7 mm
Distance between web toes of filletsT20 in508 mm
Workable gage (inner holes)WGi5.5 in140 mm
W24x146 cross-section with depth, flange width, web thickness and flange thickness d = 24.7 in bf = 12.9 in tf = 1.09 in tw = 0.65 in
W24x146 section (drawn to scale for depth and flange width; thicknesses enlarged for readability)

W24x146 Section Properties

PropertySymbolImperialMetric
Moment of inertia, x-axisIx4,580 in⁴1,910 ×10⁶ mm⁴
Elastic section modulus, x-axisSx371 in³6,080 ×10³ mm³
Plastic section modulus, x-axisZx418 in³6,850 ×10³ mm³
Radius of gyration, x-axisrx10.3 in262 mm
Moment of inertia, y-axisIy391 in⁴163 ×10⁶ mm⁴
Elastic section modulus, y-axisSy60.5 in³991 ×10³ mm³
Plastic section modulus, y-axisZy93.2 in³1,530 ×10³ mm³
Radius of gyration, y-axisry3.01 in76.5 mm
Torsional constantJ13.4 in⁴5,580 ×10³ mm⁴
Warping constantCw54,600 in⁶14,700 ×10⁹ mm⁶
Effective radius of gyrationrts3.53 in89.7 mm
Distance between flange centroidsho23.6 in599 mm
Flange slendernessbf/2tf5.925.92
Web slendernessh/tw33.233.2

W24x146 Weight Calculator

Enter a length to get the total weight of a W24x146 beam. A 20 ft length weighs 2,920 lb.

Uses the AISC nominal weight: 146 lb/ft (217 kg/m).

Beams Similar to W24x146

ShapeWeight (lb/ft)Depth (in)Flange width (in)
W24x13113124.512.9
W24x1621622513
W24x11711724.312.8

See every W24 size in the W24 beam sizes chart, or compare all shapes in the wide flange beam sizes chart. Working in millimetres? W24x146 is listed as W610x217 in the metric wide flange beam sizes chart.

W24x146 FAQ

What does W24x146 mean?

W means wide flange. The first number (24) is the nominal depth in inches, and the second number (146) is the weight in pounds per foot. The actual depth of W24x146 is 24.7 in. How to read steel beam sizes.

How much does a W24x146 beam weigh?

W24x146 weighs 146 lb per foot (217 kg per meter). A 20 ft beam weighs about 2,920 lb. Use the calculator above for any length.

What is the metric equivalent of W24x146?

The metric (SI) designation is W610x217: 627 mm deep with a 328 mm flange and 217 kg/m.

How far can a W24x146 beam span?

Span depends on the load, support conditions, deflection limits and local building code, so it cannot be read from a size table. A licensed structural engineer must size any beam that carries a load.


Source: AISC Shapes Database v16.0, consistent with the AISC Steel Construction Manual, 16th Edition. Last updated: September 2026.
This page is reference information only and is not engineering advice. Do not use it for a specific design without verification by a licensed engineer or architect. Full disclaimer.

Look up any steel beam size

Search all 339 AISC W, S and HP shapes, compare sizes by depth and work out total weight in seconds.